Frequently Asked Questions The
Following Is A List Of Frequently Asked Questions For The Rod End &
Ball Joint Bearings And The Answers. If You Do Not Find An Explanation
To Your Query In This List, Please Use The Response Form
And Send Us Your Query And We Shall Promptly Respond To The Same. What
Are Rod Ends & Ball Joint Bearings And What Are The Applications For
These Rod Ends & Ball Joint Bearings ? Please Refer The Technical Data Sheet – Bearings Features For Details. I
Am An Exiting User Of Rod Ends. What Are Your Equivalent Sizes And
Ranges In Comparison To Those Available In The Market? The
Following Table Provides A Comparison Between Slpl Bearings Series And
Other Popular Brands Series Available In The Market. This Table Is
Intended To Be Used For Reference Purposes Only. The Comparison Is
Provided For Guidance And Should Be Verified Before Use. The Information
Provided Should Be Verified With The Detailed Technical Literature For
Dimensions & Properties For Other Brands.
What
Is The Stardard Pitch Of The Threads ? The
Standard Pitch Of The Threads Is Defined By National & International
Standards On Threads. The Following Table Indicates The Standard Pitch
For Various Thread Sizes.
Are
Various Pitches Available, Fine Coarse And So On? Yes,
We Offer Various Pitch Sizes Over Standard Pitch Sizes. Simply Add The
Required Pitch Size At The End Of The Ordering Code For Your Requirement
Or Contact Factory For Further Details. What
If My Requirement Is For Different Specifications Of Materials? We
Can Provide The Rod End And Ball Joint Bearings In A Variety Of
Materials Including Carbon Steel, Stainless Steels. However, Certain
Minimum Order Quantity And Other Conditions Apply. Contact The Factory
With Details Of The Modification For Our Immediate Response To Your
Special Requirements. What
If My Requirement Is For Different Threads, Inch Metric? We
Can Provide The Rod End Bearings In A Variety Of Threads Which Include
Metric, Inch Series. Inch Series Includes Unf, Bsw And Other Threads
Specifications. However, Certain Minimum Order Quantity And Other
Conditions Apply. Contact The Factory With Details Of The Modification
For Our Immediate Response To Your Special Requirements. What
If I Require Some Modifications In The Standard Design? Modification
In The Standard Design Are Possible. However, Certain Minimum Order
Quantity And Other Conditions Apply. Contact The Factory With Details Of
The Modification For Our Immediate Response To Your Special
Requirements. What
Are The Combinations Available In These Products? These
Are Available In Standard Metric Threads In Male / Female Thread
Combinations, Right Hand / Left Hand Thread Combinations With Standard /
Non Standard Pitch Sizes. Inch Series Are Also Available On Request. What
If I Require Special Finishing For These Products? It
Is Possible To Provide A Variety Of Surface Finishes For These Products.
These Include Zinc Plating With Yellow, Blue & Green Passivation,
Chromium Plating, Nickle Plating And So On. The Standard Finish Which Is
Provided Is Zinc Cobalt Surface Protection For All Components Of The
Bearings Except The Ball Which Is Chromium Plated. My
Requirement Needs These Products To Be Used In Heavily Polluted, Dusty
And High Temperature Environments. Can These Be Used? These
Are Ideally Suited And Widely Used In Gear Shafts Of Automobiles And
Other Rigourous Applications Which Require Use In Heavily Polluted,
Dusty And High Temperature Environments. Since The Standard Supply Is
With Mos2 Reinforced Polyamide, The Operating Temperature Range Is From
–40 Degrees Centigrade To 80
Degrees Centigrade. To Determine A Part’s Useful Life For A Particular
Application, Sample Parts Should Be Tested Under Actual Operating
Conditions. Does
The Use Of A Plastic Raceway Deteriorate The Performance Or Safety Of
These Products? No.
These Products Are Manufactured As Per The International Product
Standards, Namely, Iso 12240 Part Iv : 1998. Plactic Raceway Rodends
Incorporate Use Of Engineering Thermoplastic Raceways Which Are
Reinforced With Self Lubricating Additives Like Mos2 And Ptfe. These
Eliminate The Need Of Periodic Lubrication And Make Them Maintenance
Free. The Safety Aspects Are Generally Determined By The End Usage
Conditions Like The Load Requirements Of The Application, Temperatures
And Environmental Conditions. Since We Are Unable To Determine All
Applications In Which This Part May Be Placed, It Is The User’s
Responsibility To Determine The Suitability Of This Part For Its
Intended Use. This Is Especially True Where Safety Is A Factor.
Incorrect Application Or Installation May Result In Property Damage,
Bodily Injury, Or Death I
Have A Totally Different Linkage Requirement Which Does Not Fall Into
The Standard Category. How Can I Get These Sourced From Slpl? Simply Send Us The Details Required For Development Of Your Linkage Requirement. These Could Include Drawings, Specifications. If These Are Not Available, A Detailed Note On How These Are Proposed To Be Used, Incorporated Into Your Machine/Application Design. Additionally, The Environmental Conditions, Operating Temperatures, Cycle Operations And Any Additional Data Available Can Also Be Provided. Our Experienced Engineering Department Shall Develop The Required Linkage For You (Conditions For Development Apply).
Disclaimer |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
