Usage
Suggestions
APPLICATION SUGGESTIONS
-
To prevent/eliminate the possibility of exceeding the misalignment of rodend, a separate stop in the linkage system should be incorporated. Premature failure of the joint could be avoided this way.
-
Applications which encounter excessive vibrations may result in chipping or distortion of the plated balls, consequently resulting in increased torque, wear and premature failure. Self locking nylon insert nuts or lock washers which secure the balls should be used to prevent this.
-
For optimum utilization of the joint with respect to the gravitational force, rodend bearings should be mounted with the housing members on the top.
-
Testing under actual operating is the only reliable means of determining a part useful life.
-
Tensile strength show in the table are expected minimum results based on tests based on actual tests performed on production samples. These should be used only as a guideline and suitable safety factors should be incorporated ay the time of designing.
BALL JOINT / RODENDS ASSEMBLY TENSILE TEST PROCEDURE
A
Ball Joint/Rodend assembly is tensile tested by placing the ball
member/stud in a fixed position and applying increasing tensile force
along the axis of the internally threaded housing untile rupture occurs.
The assembly’s ultimate strength then is either the maximum tensile
stress of the internally threaded housing or the maximum shear stress of
the male threaded stud, whichever ruptures first.
|
Static
Load Capacity (Kgs)
|
|
Static
Load Capacity (Kgs)
|
SEF
05
|
580
|
SEM
06
|
340
|
SEF
06
|
710
|
SEM
06
|
480
|
SEF
08
|
1040
|
SEM
08
|
880
|
SEF
10
|
1360
|
SEM
10
|
1360
|
SEF
12
|
1730
|
SEM
12
|
1730
|
SEF
14
|
2130
|
SEM
14
|
2130
|
SEF
16
|
2590
|
SEM
16
|
2590
|
SEF
18
|
3080
|
SEM
18
|
3080
|
SEF
20
|
3620
|
SEM
20
|
3620
|
Disclaimer
Sameer Linkages Private Limited reserves the right to change
specifications and other information included in this technical data
sheet without prior notice. All information, data and dimension tables
in this technical data sheet have been carefully compiled and thoroughly
checked. However, no responsibility for possible errors or omissions can
be assumed. Since the manufacturer is unable to determine all
applications in which this part may be placed, it is the user’s
responsibility to determine the suitability of this part for its
intended use. This is especially true where safety is a factor.
Incorrect application or installation may result in property damage,
bodily injury, or death. For technical assistance, please contact the
manufacturer at email : support@sameerlinkages.com
or voice : ++91-265-642405 or fax : ++91-265-643660
|